What are magnets? According to the Webster Dictionary, a magnet is “a body having the property of attracting iron and producing a magnetic field external to itself or a mass of iron, steel or alloy that has this property artificially imparted.” Magnets are used for various purposes like magnetic recording tapes, credit and debit cards, television and computers, speakers, microphones, compass toys etc. The greatest contribution of magnets has been in the fields of electronic, chemical, mining, automobile, medical and food processing industries. Magnets were initially manufactured by and used in the West, but as technology increased and developing countries started taking part in the industrial and electronic revolution, the use of magnets spread to all areas of the world, be it Africa or Asia. The increasing population of these areas, meaning increased labour, along with the emerging government policy of various countries combined with low labour costs and big internal markets have made the Asian and African regions on par with the West.

Different types of magnets are now being used for different types of industries. The funnel magnet, a magnet enclosed in a cylinder and consisting of permanent anisotropic magnets like ferrite or rare earth magnets, useful in the removal of iron impurities from any liquid, is used in the ceramic, oil, colours and magnetic industries. Magnets are used in Magnetic Resonance Imaging (MRI scans) in hospitals. In the electronic industry, magnets are used extensively. Magnets help in the working of televisions by scattering electrons towards various parts of the screen. Computer screens work on a similar principle as that of television whereas the storage disks used inside the computers have tiny magnetic fields which help in the storage of data.

Magnets in video tapes work in the same way as the computer storage disks. Magnets are used in speakers and microphones as well to scatter the sound. Mining industry uses magnets for detecting minerals and separating the impurities. Magnets are used extensively in the automobile industry. The major usage of magnets in cars is in the starter motor, interior fan motor, electric door locks, windshield wiper motor, engine speed sensors, cd and audio tape player motor and electric window motor. Some other important electronics and motors in which magnets are used are-dishwasher, refrigerator, furnace, washing machine, ceiling fan, pager or cell phones, ceiling fans and certain clocks. The most highly demanded magnets in the market are ceramic hard ferrites, bonded ferrites and neodymium iron boron magnet.

The magnet industry has gained immense popularity in the market. Magnets are an essential part of any electronic, automobile, chemical and many other major industries. According to the 2005 census, the global market of magnets was around $ 7.6 billion. The market of magnets is expected to grow from $8.1 billion to $11.8 billion, at an average growth rate of 7.8% per year. Maximum growth of the magnet industry is expected in countries like India, China, Russia, Taiwan, Indonesia and Mexico, basically in the developing countries.

Please Visit : www.jupitermagnetics.com

Watch the video related to Magnetic Sensors

John Brauer introduces his book and seminar titled “Magnetic Actuators and Sensors” by showing a variety of such devices. Inquire at jbrauer@ieee.org

Help answer the question about Magnetic Sensors

Thanks

Dan

About Author

Jupiter Magnetics -
About the Author:

Jupiter Magnetics established in 1969 and company engage in manufacturing of industrial magnetic separators, magnetic lifters, plate magnets, magnetic tubes, lifting magnets, magnetic filters and other products in India.Please Visit Our Website:www.jupitermagnetics.com

ZG-D6A2    Security retail  Display Stand for mobile

With alarm function, this ZG-D6A1 is mainly designed for secure displays of live merchandises such as mobile phones, cameras, mp3/mp4, PDA, GPS, and etc..

Secure & neat displays of these merchandises, interactions between consumers and merchandises are also realized with this product. And thus better promote sales of open merchandises.

Address:  ZhongDu Office Center, Linping, Hangzhou China
Email:  darwin@saifechina.com  
Website:  www.saifechina.com

Main features
Independent alarm function:
If sensor wire is cut, or sensor is separated from the displayed merchandise, system will give alarm immediately.

Battery backup:
If there is any power cut in sale places, the inbuilt batteries can continue & supply power for support.

Double security:
We can add sensor to this system for double security for the open merchandise (security from two kind of electronic sensors)

Multi – tamper & alarm function:
Tamper security for overall unit, the cover, the holder, and etc..

Charger function for open merchandise:
If this function is added, our system can provide a 4.2V for charging mobile phone battery.

Flexible & Easy installation:
A. Directly fix it by screw
B. Select our T-shaped base & fix system to display desk via a 3M tape.

Technical parameters:
1)       Stand height: 13cm (standard) or customize
2)       Battery: 3.6V
3)       Power adapter: DC-6V (as options),  (If required, please make statement before ordering)
4)       Maximum battery standby: 1 year
5)       Alarm volume: 85-105DB
6)       Alarm indication: red LED light twinkling
7)       Tamper indication: green LED light twinkling
8)       Low battery indication: LED twinkling with alert given
9)       Turn on / off alarm: sound & light indication
10)   Holder options: Flat / Chamfer holder (Magnetic), (Please make statement before ordering)
11)   Off-hook signal output: Switch signal output, (If required, please make statement before ordering)
12)   Charger function: 4.2V mobile charger output, (If required, please make statement before ordering)
13)   Alarm switch: Key (standard) / Remote control (as options), (If remote control is required, please make statement before ordering)
14)   Reel: Many reels as options, (Please select your preferable item number before ordering)
15)   Adhesive base: T-shaped metal mounting base. (If required, please make statement before ordering)
16)   Shell material: ABS

Watch the video related to Magnetic Sensors

www.philtec.com Fiber optics for high magnetic fields. Fiber optic sensors for distance to glass measurements. Call us for your custom sensor 410-757-4404.

Help answer the question about Magnetic Sensors

About Author

Darwin -
About the Author:

An automatic drain is used for discharging the accumulations of condensable and unwanted foreign materials from a pneumatic system. The principal constituent of an automatic drain is a drain valve, which consist of a reservoir. The reservoir has an inlet and outlet for the entry and exit of accumulations within the pneumatic system. For selective communication of pressurized air, there is a valve operator. It is mounted in the reservoir in such way that automatic opening and closing of the valve takes place for selective draining.

The pilot valve comprises of a sensor tube in which there is a magnetized valve plug. This magnetized valve plug helps in selectively engaging the valve seat and valve plug for making the one-way flow possible. Both the valve seat and the valve plug have a magnetic polarity. Opposite to its polarity, there is an annular magnet dispersed within the reservoir. It senses the level of the float. The entire action is based on the opposite polarity of these two magnets, so that discharge can easily pass out in one direction after entering from the other direction. As the level of the water increases and decreases, the float, immersed in water, successively rises and falls.

The main functions of these automatic drains are freeze protection capability, longer watering season, faster winterization, easy method of installation, and guaranteed performance. There are automatic wings for easy installation and a dirt stopper screen is provided with it. There is a patented recessed wicking pad and patented ball valve which creates turbulent flashing action, installed in the automatic drain. Products obtained from a genuine source don’t burst usually. In case you are concerned with lesser water consumption, offsetting drainage by shortening cycles in just a minute’s time is the best option.

There are a wide number of products devised for the benefit of the customers. These products are available online. The products include the following:

• Mainline Drains: SPRHP400050 Blazing 1/2″ MPT Mainline Drain has an excellent turbulent flushing action has all the facilities like dirt-stopper screen, easy-install wings and patented recessed wicking pad. It can withstand up to 2500 psi burst pressure.

• Swing pipe elbow drains or SPRFP1800 Blazing 1/2″ MPT to Funny Pipe (Swing Pipe) Lateral Line Drain is priced reasonably.

• Poly pipe end of line drains: SPRHP1500 Blazing 3/4″ Poly x 1/2″ FPT End of Line Drain has an insert elbow with a drain built in. The price offered by at online shops is quite reasonable.

• PVC Pipe end of line Drains: SPRHP1200 Blazing 3/4″ SOC x 1/2″ FPT End of Line Drain consists of durable PVC construction and has all the advantages like dirt stopper and easy install wings etc.

• Siphon Drain™, SPRSD1000 Blazing Siphon Drain for 1/2″ to 1″ (Install on PVC or Polyethylene in 3 Seconds) would enable you to save your labor and has easy method of fitting with clamps and cement. Grommots are available for easy installation.

Watch the video related to Magnetic Sensors

Aquamon Water Level Indicator Ingenious Technologies (I) Pvt., Ltd., Offers a highly sophisticated and reliable Automatic Water Level Indicator using state of the art Digital Technology. AQUAMON is ideally suited for modem homes, apartments, commercial complexes, hotels, hospitals and other places where there is a need to monitor levels of liquids. Features: Aquamon’ has an elegant mimic display which indicates the water level in the overhead tank and sump, it has a flow indication. Audio alarm for High Level and Low Level. Alarm auto mute in 45 to 60 seconds. Specially designed sensor probes are fixed in the overhead tank. The unique AC Signalling technology ensures zero maintenance, trouble free operation for years. ingenious.co.in

Help answer the question about Magnetic Sensors

About Author

Kathleen Chester -
About the Author:

For Automatic Drains Log on to SprinklerMart.com that ensures optimum benefit.

Related Post:

Special purpose speed sensors Road vehicles Wheel speed sensors are used in anti-lock braking systems. Rotary speed sensors for rail vehicles Many of the subsystems in a rail vehicle, such as a locomotive or multiple unit, depend on a reliable and precise rotary speed signal, in some cases as a measure of the speed or changes in the speed. This applies in particular to traction control, but also to wheel slide protection, registration, train control, door control and so on. These tasks are performed by a number of rotary speed sensors that may be found in various parts of the vehicle. In the past, sensors for this purpose often failed to function satisfactorily or were not reliable enough and gave rise to vehicle faults.

This was particularly the case for the early mainly analogue sensors, but digital models were also affected. This was mainly due to the extremely harsh operating conditions encountered in rail vehicles. The relevant standards specify detailed test criteria, but in practical operation the conditions encountered are often even more extreme (such as shock/vibration and especially electromagnetic compatibility (EMC)). Rotary speed sensors for motors Bearingless motor speed sensors Although rail vehicles occasionally do use drives without sensors, most need a rotary speed sensor for their regulator system. The most common type is a two-channel sensor that scans a toothed wheel on the motor shaft or gearbox and therefore does not require a bearing of its own.

The target wheel can be provided especially for this purpose or may be already present in the drive system. Modern sensors of this type make use of the principle of magnetic field modulation and are suitable for ferromagnetic target wheels with a module between m =1 and m = 3.5 (D.P.=25 to D.P.=7). The form of the teeth is of secondary importance; target wheels with involute or rectangular toothing can be scanned. Depending on the diameter and teeth of the wheel it is possible to get between 60 and 300 pulses per revolution, which is sufficient for drives of lower and medium traction performance. This type of sensor normally consists of two hall effect sensors, a rare earth magnet and appropriate evaluation electronics. The field of the magnet is modulated by the passing target teeth. This modulation is registered by the Hall sensors, converted by a comparator stage to a square wave signal and amplified in a driver stage. Unfortunately, the Hall effect varies greatly with temperature. The sensors sensitivity and also the signal offset therefore depend not only on the air gap but also on the temperature. This also very much reduces the maximum permissible air gap between the sensor and the target wheel.

At room temperature an air gap of 2 to 3 mm can be tolerated without difficulty for a typical target wheel of module m = 2, but in the required temperature range of from 40C to 120C the maximum gap for effective signal registration drops to 1.3 mm. Smaller pitch target wheels with module m = 1 are often used to get a higher time resolution or to make the construction more compact. In this case the maximum possible air gap is only 0.5 to 0.8 mm. For the design engineer, the visible air gap that the sensor ends up with is primarily the result of the specific machine design, but is subject to whatever constraints are needed to register the rotary speed. If this means that the possible air gap has to lie within a very small range, then this will also restrict the mechanical tolerances of the motor housing and target wheels to prevent signal dropouts during operation. This means that in practice there may be problems, particularly with smaller pitched target wheels of module m = 1 and disadvantageous combinations of tolerances and extreme temperatures. From the point of view of the motor manufacturer, and even more so the operator, it is therefore better to look for speed sensors with a wider range of air gap. The primary signal from a Hall sensor loses amplitude sharply as the air gap increases. For sensor manufacturers this means that they need to provide maximum possible compensation for the Hall signal physically induced offset drift. The conventional way of doing this is to measure the temperature at the sensor and use this information to compensate the offset, but this fails for two reasons: firstly because the drift does not vary linearly with the temperature, and secondly because not even the sign of the drift is the same for all sensors.

For a new sensor generation it was therefore necessary to find another way: an integrated signal processor now corrects the offset and amplitude of the Hall sensor signals. This correction is so effective that one can almost double the maximum permissible air gap at the speed sensor. On a module m = 1 target wheel these new sensors can tolerate an air gap of 1.4 mm, which is wider than that for conventional speed sensors on module m = 2 target wheels. On a module m = 2 target wheel the new speed sensors can tolerate gap of as much as 2.2 mm. It has also been possible to markedly increase the signal quality. Both the duty cycle and the phase displacement between the two channels is at least three times as stable in the face of fluctuating air gap and temperature drift. In addition, in spite of the complex electronics it has also been possible to increase the MTBF for the new speed sensors by a factor of three to four. So they not only provide more precise signals, their signal availability is also significantly better. These new sensors, still with the familiar appearance, thus open up whole new possibilities for the designers of drives for rolling stock. The sensors are attractively priced and operate without wear and tear. Motor encoders with integrated bearings There is a limit on the number of pulses achievable by sensors without integrated bearings: with a 300 mm diameter target wheel it is normally not possible to get beyond 300 pulses per revolution. But many locomotives and electric multiple units (EMUs) need higher numbers of pulses for proper operation of the traction converter, for instance when there are tight constraints on the traction regulator at low speeds. Such applications really need encoders with built-in bearings, which can tolerate an air gap many orders of magnitude smaller because of the greatly reduced play on the actual sensor as opposed to that of the motor bearing. This makes it possible to choose a much smaller pitch for the measuring scale, right down to module m = 0.22. There are a number of types of encoder with this property. One of them is used in large numbers in EMUs. It can be used to achieve values from less than 100 to more than 130 000 pulses per revolution. In railway applications however, the maximum possible pulses per revolution are not required. For even greater robustness and signal accuracy a precision encoder can be used. The functional principles of the two encoders are similar: a multichannel magneto-resistive sensor scans a target wheel with 256 teeth, generating sine and cosine signals. Arctangent interpolation is used to generate up to 512 rectangular pulses from each of the 256 signal periods per revolution. The precision encoder also possesses amplitude and offset correction functions that are housed in the external interpolation unit. This makes it possible to further improve the signal quality, which has a very positive effect on the traction regulator. Speed sensors on the wheelset Bearingless wheelset speed sensors Bearingless speed sensors may be found in almost every wheelset of a rail vehicle. They are principally used for wheel slide protection and usually supplied by the manufacturer of the wheel slide protection system. These sensors require a sufficiently small air gap and need to be particularly reliable. One special feature of rotary speed sensors that are used for wheel slide protection is their integrated monitoring functions. Two-wire sensors with a current output of 7 mA/14 mA are used to detect broken cables. Other designs provide for an output voltage of around 7 V as soon as the signal frequency drops below 1 Hz. Another method used is to detect a 50 MHz output signal from the sensor when the power supply is periodically modulated at 50 MHz. It is also common for two-channel sensors to have electrically isolated channels. Occasionally it is necessary to take off the wheel slide protection signal at the traction motor, and the output frequency is then often too high for the wheel slide protection electronics. For this application there is a speed sensor with an integrated frequency divider. There are now products available that are compliant with all the usual standards, with considerably improved technical properties and markedly longer useful lives. Wheelset pulse generator with integrated bearing A rail vehicle, particularly a locomotive, generally possesses numerous subsystems that require a separate electrically separated speed signal. There usually is neither enough mounting places nor is there sufficient space where separate pulse generators could be installed. For many years there have therefore been multichannel pulse generators that are flange-mounted onto the bearing shells or covers of wheelsets. These have the advantage over bearingless models that they can generate markedly higher pulse numbers. Using a number of bearingless speed sensors would also involve additional cables, which should preferably be avoided for outdoor equipment because they are so susceptible to damage, for instance from flying track ballast. Optical sensor All the manufacturers previously active in this market used mainly optical sensors. From one to four channels can be implemented, each channel having a photosensor that scans one of at most two signal tracks on a slotted disk. Experience shows that the possible number of channels achievable by this technique is still not enough. A number of subsystems therefore have to make do with looped-through signals from the wheel slide protection electronics and are therefore forced to accept, for instance, the available number of pulses, although a separate speed signal might well have some advantages. The use of optical sensors has been familiar for many years and is widespread in industry. Unfortunately they do have two fundamental weaknesses that have always made it very difficult to get them to function reliably over a number of years, namely – the optical components are extremely susceptible to dirt, and – the light source ages too quickly. Even traces of dirt greatly reduce the amount of light that passes through the lens and can cause signal dropout. These encoders are therefore required to be very well sealed. Even sealing the encoder bearing to prevent it emitting grease is a problem that even the ingenuity of designers has been unable to fully resolve. Further problems are encountered when the pulse generators are used in environments in which the dew point is passed: the lenses fog and the signal is frequently interrupted. The light sources used are light-emitting diodes (LEDs). But LEDs are always subject to ageing, which over a few years leads to a noticeably reduced beam.

Attempts are made to compensate for this by using special regulators that gradually increase the current through the LED, but unfortunately this further accelerates the ageing process. Magnetic sensor The principle used in scanning a ferromagnetic measuring scale magnetically does not exhibit these deficiencies. During many years experience of using magnetic encoders there have been occasions when a seal has failed and a pulse generator has been found to be completely covered in a thick layer of brake dust and other dirt, but such pulse generators still functioned perfectly. Magnetic scanning systems were previously simply too expensive to use, but recently a multichannel pulse generator became available that is not only fundamentally superior to previous pulse generators in its robustness and resistant to dirt, but also sets a new standard for flexibility. Here, for comparison, are a few of its key features: from one to eight channels, instead of the previous one to four up to three different pulse values per revolution from a single encoder, instead of the previous two from 1 to 400 pulses per revolution, instead of the previously achieved 200 voltage output, current output, signals with a 7 V idle voltage, instead of only a voltage output as previously There is now a new variant with a maximised hysteresis of 90 relative to a signal period. When installed under unfavourable conditions and exposed to severe vibration this variant suppresses any extraneous pulses while the vehicle is at a standstill. Altogether, these innovative pulse generators offer new features that also open up entirely new possibilities for system integrators. It is possibly to supply significantly more subsystems with independent, electrically isolated output signals. And naturally installation compatible pulse generators can be configured for all the usual previously marketed products. The magnetic measuring principle and optimised bearing technology increases the pulse generators reliability, not only increasing maintenance intervals but also significantly reducing maintenance costs. Pulse generators constructed in accordance with this principle have been successfully field tested by several rail operators since the beginning of 2005. The type test specified in EN 50155 has also been successfully completed, so that these pulse generators can now be delivered. Wheelset pulse generators with integrated bearings for inside-journal bogies Inside-journal bogies make particular demands on the pulse generator designer because they have no bearing cover on the end to serve as the basis from which the rotation of the wheelset shaft could be registered. In this case the pulse generator has to be mounted on a shaft stub attached to the wheelset and fitted with a torque converter connected to the bogie frame to prevent it from rotating. The extreme vibration in this location leads to a considerable load on the pulse generator bearing, which, with this method of installation has to carry not only the relatively small mass of the pulse generator shaft but that of the entire pulse generator. When we consider that bearing life reduces with at least the third power of the load we can see that a reliable and durable pulse generator for such a situation cannot merely be adapted from the more common standard pulse generator for outside-journal bogies merely by fitting and intermediate flange or similar construction.

It really is necessary to have a pulse generator with a modified design adapted to the requirements of such a location. Previously these pulse generator were available only with considerably restricted technical properties, for instance limited to at most 140 pulses per revolution or a limited number of channels. A new product has now been developed that offers the complete specification for a wheelset pulse generator in a housing that was specially designed for installation in inside-journal bogies. Speed sensors for non-magnetic target wheels or applications that produce swarf Some transport companies are faced with a special problem: the circulating air that keeps the motors cool carries swarf abraded from the wheels and rails. This collects on the heads of magnetic sensors and can cause malfunctions. Such a agnetic short circuit can cause dropouts or complete loss of signal. And there have been cases where encoders have been physically damaged by the abrasive effect of the particles. There are also increasingly motors in which sensors have to scan aluminium target wheels, for instance because the impellers are made of an aluminium alloy and the manufacturer does not wish to have to shrink on a separate ferromagnetic gear rim. For these applications there is a speed sensor available that gets by without a magnet. A number of transmitting and receiving coils are used to generate an alternating electric field with a frequency of the order of 1 MHz and the modulation of the coupling between senders and receivers is then evaluated. This sensor is installation and signal compatible to the magnetic sensors; for most common target wheel modules the units can simply be replaced without any other measures being necessary.

Over the last few years these sensor have been able to drastically reduce the failure rates of many transport companies when installed in the critical environments described above. Speed sensors with pulse doubling Customers often want a higher number of pulses per revolution than can be achieved in the space available and with the smallest module m = 1. An industry standard flange-compatible speed sensor has been developed for such applications that generates two pulses for each tooth of the wheel. This makes it possible to achieve 600 pulses per revolution with a target wheel module m = 1 and a diameter of 300 mm. These speed sensors are currently being tested at a major system integrators. References  http://www.selectron.ch/downloads/kataloge/normen-EN-50-155/Standard-EN-50155.pdf External links Continental Automotive Systems SafelyThere – Continental Automotive Systems Vehicle Safety Equipment “Drive Safer America” Wheel speed sensor installation/removal procedure Encoders for rail road vehicles Sensors for rail road vehicles Categories: Automotive safety technologies | Railway safety | Speed sensorsHidden categories: Articles lacking sources from April 2009 | All articles lacking sources

Watch the video related to Magnetic Sensors

Today, many designers and manufacturers are faced with increasing requirements regarding energy efficiency and low emissions, growing demands for convenience and rising safety & security necessities. In most cases these requirements can only be fulfilled by closed loop systems, where especially magnetic and pressure sensors are becoming more and more the key elements in systems together with the microcontroller and power elements. This EBV.TV video introduces Infineons product portfolio of magnetic and pressure sensors covers a wide range of applications, such as rotational speed sensors and hall switches for all kinds of position sensing and index counting.

Help answer the question about Magnetic Sensors

About Author

xiao -
About the Author:

I am an expert from bwt-laser.com, while we provides the quality product, such as 785nm diode laser module , 940nm diode laser module, laser module suppliers,and more.